Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMINI2013COOPER COUNTRYMAN, STANDARD TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 3015 (TRAILERS - REPAIR - E90)8610 LOADING PLATFORM8610... DISASSEMBLY OF BASE PLATENOTES
2013 Mini Cooper Countryman, Standard Trans
8610... Disassembly of base plate: Notes
2013 Mini Cooper Countryman, Standard TransSECTION Notes
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 335xi, 2010 BMW 335i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Disassembly of bar
REFER TO 86 10... REPLACING BAR
Disassembly of lashing plate
REFER TO 86 10... REPLACING LASHING PLATE AND LASHING EYE
Disassembly of 12 volt socket REFER TO 86 10... REPLACING 12 VOLT SOCKET
Remove plastic bush/metal bush
REFER TO 86 10... REMOVING PLASTIC BUSH/METAL BUSH
Disassembly of light guard
REFER TO 86 10... REPLACING REAR LIGHT
Disassembly of front apron
REFER TO 86 10... DISASSEMBLY OF FRONT APRON
Disassembly of left and right aprons
REFER TO 86 10... DISASSEMBLY OF LEFT AND RIGHT APRONS
Disassembly of left and right wheel boxes
REFER TO 86 10... DISASSEMBLY OF LEFT AND RIGHT WHEEL BOXES
Disassembly of rear apron
REFER TO 86 10... DISASSEMBLY OF REAR APRON
Disassembly of left and right lamp housings
REFER TO 86 10... DISASSEMBLY OF LEFT AND RIGHT LAMP HOUSINGS
Disassembly of rivet connection, rear support
REFER TO 86 10... DISASSEMBLY PROCEDURE OF RIVET CONNECTION, REAR SUPPORT
REFER TO 86 10... REPLACING BAR
Disassembly of lashing plate
REFER TO 86 10... REPLACING LASHING PLATE AND LASHING EYE
Disassembly of 12 volt socket REFER TO 86 10... REPLACING 12 VOLT SOCKET
Remove plastic bush/metal bush
REFER TO 86 10... REMOVING PLASTIC BUSH/METAL BUSH
Disassembly of light guard
REFER TO 86 10... REPLACING REAR LIGHT
Disassembly of front apron
REFER TO 86 10... DISASSEMBLY OF FRONT APRON
Disassembly of left and right aprons
REFER TO 86 10... DISASSEMBLY OF LEFT AND RIGHT APRONS
Disassembly of left and right wheel boxes
REFER TO 86 10... DISASSEMBLY OF LEFT AND RIGHT WHEEL BOXES
Disassembly of rear apron
REFER TO 86 10... DISASSEMBLY OF REAR APRON
Disassembly of left and right lamp housings
REFER TO 86 10... DISASSEMBLY OF LEFT AND RIGHT LAMP HOUSINGS
Disassembly of rivet connection, rear support
REFER TO 86 10... DISASSEMBLY PROCEDURE OF RIVET CONNECTION, REAR SUPPORT
Unscrew bolts (1).
CAUTION:
Before drilling out rivet heads, drive in rivet pins with a punch.
Drill out rivet connections (2).
Drill out rivet connections (2).
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.