Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMINI2013COOPER COUNTRYMAN, STANDARD TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 2969 (STEERING AND WHEEL ALIGNMENT - REPAIR - E90)
2013 Mini Cooper Countryman, Standard Trans
Section 2969 (Steering And Wheel Alignment - Repair - E90)
2013 Mini Cooper Countryman, Standard TransSECTION Section 2969 (Steering And Wheel Alignment - Repair - E90)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 BMW 328i, 2011 BMW 323i, 2010 BMW 335i, 2010 BMW 328i, and 2010 BMW 323i. However, it is still accessible from the selected car via links, so may be relevant.
- 3200 Electronic chassis alignment
- 3200620 Adjusting rear axle
- 3200610 Adjusting toe-in and camber on front axle
- 3210005 Adjustment for active front steering
- 6131996 Carrying out steering angle sensor adjustment
- 00 Danger of poisoning if oil is ingested/absorbed through the skin
- 3100... Front axle + steering: wheel/chassis alignment check must be carried out after the following work
- 3200... General chassis and suspension definitions
- 3200... General information and definitions
- 3200... Identification of suspension without label
- 3200... Identifying suspension from label on front axle
- 3200... Information on replacing steering gear after accident damage
- 3200155 KDS chassis/wheel alignment check with ride height measurement without vehicle load
- 3200150 KDS chassis/wheel alignment check with vehicle load up to design position
- 3200... Moving vehicle into design position
- 3200... Moving vehicle into normal position
- 32... Overview of steering
- 32...... Overview of steering wheel/casing components
- 3200... Performing rim runout compensation
- 00...... Raising vehicle with trolley jack
- 3300... Rear axle: wheel/chassis alignment check must be carried out after the following work
- 00 Risk of injury if oil comes into contact with eyes and skin
- 00 Safety information for working on vehicles with automatic engine start-stop function (MSA)
- 00 Safety instructions for handling oil
- 3200... Test conditions for chassis/wheel alignment check
- 3211 mechanical steering gear
- 3200... Information on replacing steering gear after accident damage
- 3211... Notes on checking steering backlash on vehicles with rack-and-pinion steering (with front axle raised)
- 3211... Replacing gaiter for electric steering gear (EPS) on left or right
- 3211100 Replacing gaiter for steering gear on left or right
- 3213 steering gear with servo unit
- 3213006 Bleeding power steering unit
- 3200... Information on replacing steering gear after accident damage
- 3213070 Removing and installing (replacing) electric steering gear (EPS)
- 3213065 Removing and installing/replacing active front steering power steering gear
- 3213060 Removing and installing/replacing power steering gear
- 3211... Replacing gaiter for electric steering gear (EPS) on left or right
- 3221 steering arms, tie rods, steer. damper
- 3231 steering column
- 3231020 Removing and installing/replacing lower section of steering column trim
- 3231070 Removing and installing/replacing lower section of steering spindle
- 3231082 Removing and installing/replacing steering angle sensor
- 3231090 Removing and installing/replacing steering column
- 3231003 Removing and installing/replacing upper section of steering column trim
- 3231241 Replacing adjusting lever for steering column
- 3231102 Replacing steering spindle sleeve
- 3233 steering wheel
- 3234 steering wheel for airbag
- 6577... Notes on scrapping BMW vehicles with gas generators (central airbag control unit, airbag system)
- 7212... Procedure after airbag triggering as result of an accident
- 3234020 Removing and installing/replacing airbag unit
- 3234030 Removing and installing/replacing airbag unit (sport steering wheel)
- 7200... Safety regulations for handling components with gas generators
- 3241 pump and oil supply
- 3213006 Bleeding power steering unit
- 3241... Instructions for removing and installing ear clips
- 3241... Instructions for using special tool 32 4 000
- 3241... Notes on hydraulic line with quick-connect coupling
- 3241033 Removing and installing (replacing) power steering pump for power steering gear with active front steering
- 3241253 Removing and installing/replacing fluid reservoir for power steering with active front steering
- 3241060 Removing and installing or replacing hydraulic steering vane pump (N51, N52, N53)
- 3241100 Removing and installing/replacing belt pulley on vane pump for power steering
- 3241250 Removing and installing/replacing fluid reservoir for power steering
- 3241341 Replacing cooler return line for power steering
- 3241332 Replacing delivery line for power steering (N51, N52, N53)
- 3241311 Replacing intake line for power steering (N51, N52, N53)
- 3241351 Replacing return line for power steering (N51, N52, N53)
- 3243 Electronic power steering
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.