Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMINI2013COOPER COUNTRYMAN, STANDARD TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 292 (ENGINE - REPAIR (N62))
2013 Mini Cooper Countryman, Standard Trans
Section 292 (Engine - Repair (N62))
2013 Mini Cooper Countryman, Standard TransSECTION Section 292 (Engine - Repair (N62))
WARNING: This page is about a different car, the 2005 BMW 545i and 2004 BMW 545i. However, it is still accessible from the selected car via links, so may be relevant.
- Engine General
- Cylinder Head With Cover
- 11 12 005 Removing and installing/sealing left cylinder head cover (N62/N62TU)
- 11 12 006 Removing and installing/sealing right cylinder head cover (N62/N62TU)
- 11 12 105 Removing and installing left cylinder head (N62 from 9 / 03 and N62TU)
- 11 12 105 Removing and installing left cylinder head (N62 to 9 / 03)
- 11 12 106 Removing and installing right cylinder head (N62 from 9/03 and N62TU)
- 11 12 106 Removing and installing right cylinder head (N62 to 9/03)
- 11 12 503 Disassembling and assembling cylinder head (N62/N62TU)
- 11 12 527 Remachining a valve seat - cylinder head disassembled (N62)
- 11 12 595 Checking a valve guide for wear (N62)
- 11 12 719 Grinding cylinder head sealing surface (N62/N62TU)
- 11 12 729 Checking cylinder head for leaks (N62/N62TU)
- Oil Sump
- Housing Cover
- 11 14 080 Removing and installing top left timing case cover (N62/N62TU)
- 11 14 085 Removing and installing top right timing case cover (N62 / N62TU)
- 11 14 110 Removing and installing bottom timing case cover (N62 / N62TU)
- 11 14 141 Replacing radial shaft seal in timing case cover at bottom (N62 / N62TU)
- 11 14 151 Replacing crankshaft radial shaft seal (N62 / N62TU)
- Crankshaft With Bearing
- Flywheel
- Vibration Damper
- Connecting Rod With Bearings
- Piston With Rings And Pin
- V/Ribbed Belt w/Tens. Deflect Element
- Camshaft
- 11 31 032 Removing and installing/replacing left inlet camshaft (N62 from 9/03 and N62TU)
- 11 31 032 Removing and installing/replacing left inlet camshaft (N62 to 9/03)
- 11 31 034 Removing and installing/replacing right inlet camshaft (N62 from 9/03 and N62TU)
- 11 31 034 Removing and installing/replacing right inlet camshaft (N62 to 9/03)
- 11 31 036 Removing and installing/replacing left exhaust camshaft (N62/N62TU)
- 11 31 038 Removing and installing/replacing right exhaust camshaft (N62/N62TU)
- 11 31 052 Replacing both timing chains (N62/N62TU)
- 11 31 070 Checking camshaft timing on left side (N62/N62TU)
- 11 31 071 Checking camshaft timing on right side (N62/N62TU)
- 11 31 573 Adjusting camshaft timing on left side (N62 / N62TU)
- 11 31 574 Adjusting camshaft timing on right side (N62 / N62TU)
- 11 33 516 Removing and installing/replacing rocker arms on left inlet side (N62 from 9/03)
- 11 33 516 Removing and installing/replacing rocker arms on left inlet side (N62 to 9/03)
- 11 33 517 Removing and installing/replacing rocker arms on right inlet side (N62 from 9/03)
- 11 33 517 Removing and installing/replacing rocker arms on right inlet side (N62 to 9/03)
- 11 37 012 Removing and installing/replacing left intermediate lever (N62 to 9/03)
- 11 37 012 Removing and installing/replacing left intermediate levers (N62 from 9/03 and N62TU)
- 11 37 014 Removing and installing/replacing right intermediate lever (N62 to 9/03)
- 11 37 014 Removing and installing/replacing right intermediate lever (N62 from 9/03 and N62TU)
- Rocker Arm With Bearing Mount
- 11 33 516 Removing and installing/replacing rocker arms on left inlet side (N62 from 9/03)
- 11 33 516 Removing and installing/replacing rocker arms on left inlet side (N62 to 9/03)
- 11 33 517 Removing and installing/replacing rocker arms on right inlet side (N62 from 9/03 and N62TU)
- 11 33 517 Removing and installing/replacing rocker arms on right inlet side (N62 to 9/03)
- Valves With Springs
- Variable Camshaft Timing
- 11 31 070 Checking camshaft timing on left side (N62/N62TU)
- 11 31 071 Checking camshaft timing on right side (N62/N62TU)
- 11 31 573 Adjusting camshaft timing on left side (N62 / N62TU)
- 11 31 574 Adjusting camshaft timing on right side (N62 / N62TU)
- 11 36 047 Removing and installing/replacing inlet and exhaust adjustment units on left side (N62/N62TU)
- 11 36 048 Removing and installing/replacing inlet and exhaust adjustment units on right side (N62/N62TU)
- 11 36 715 Removing and installing/replacing both solenoid valves on left side (N62/N62TU)
- 11 36 720 Removing and installing/replacing both solenoid valves on right side (N62/N62TU)
- Variable Valve Gear
- 11 37 006 Removing and installing/replacing left eccentric shaft (N62 from 9/03 and N62TU)
- 11 37 006 Removing and installing/replacing left eccentric shaft (N62 to 9/03)
- 11 37 008 Removing and installing/replacing right eccentric shaft (N62 from 9/03 and N62TU)
- 11 37 008 Removing and installing/replacing right eccentric shaft (N62 to 9/03)
- 11 37 012 Removing and installing/replacing left intermediate lever (N62 to 9/03)
- 11 37 012 Removing and installing/replacing left intermediate levers (N62 from 9/03 and N62TU)
- 11 37 014 Removing and installing/replacing right intermediate lever (N62 from 9/03 and N62TU)
- 11 37 022 Removing and installing/replacing servomotor for left eccentric shaft (N62/N62TU)
- 11 37 024 Removing and installing/replacing servomotor for right eccentric shaft (N62/N62TU)
- 11 37 035 Removing and installing/replacing left eccentric shaft sensor (N62/N62TU)
- 11 37 040 Removing and installing/replacing right eccentric shaft sensor (N62/N62TU)
- 11 37 700 Replacing control unit (Valvetronic)
- Oil Supply
- Oil Pump With Filter And Drive
- Oil Filling, Dipstick
- Water Pump With Drive
- Fan
- Thermostat And Connections
- Intake Manifold
- Vacuum Pump
- Air Pump, Lines And Connectors
- Emission Control, Oxygen Sensor
- Crankcase Vent Valve/Positive Crankcase Ventilation (PCV)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.