84 11 510 Removing and installing/replacing eject box

2013 Mini Cooper Countryman, Standard TransSECTION 84 11 510 Removing and installing/replacing eject box
WARNING: This page is about a different car, the 2003 BMW Z8, 2002 BMW Z8, 2001 BMW Z8, and 2000 BMW Z8. However, it is still accessible from the selected car via links, so may be relevant.

If necessary, remove telephone from eject box.

Lift out storage tray. Refer to 51 16 200 REMOVING AND INSTALLING CENTER CONSOLE .

Loosen screws.

Remove eject box.

Fig 1: Removing Eject Box
G03207559Courtesy of BMW OF NORTH AMERICA, INC.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.