Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMINI2013COOPER COUNTRYMAN, STANDARD TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 257 (FUEL SUPPLY SYSTEM - REPAIR INSTRUCTIONS)
2013 Mini Cooper Countryman, Standard Trans
Section 257 (Fuel Supply System - Repair Instructions)
2013 Mini Cooper Countryman, Standard TransSECTION Section 257 (Fuel Supply System - Repair Instructions)
WARNING: This page is about a different car, the 2003 BMW Z8, 2002 BMW Z8, 2001 BMW Z8, and 2000 BMW Z8. However, it is still accessible from the selected car via links, so may be relevant.
- Fuel pick-up cleaning
- 16 00 Fuel supply system E52
- 16 00 General function description for fuel supply systems
- 16 00 005 Draining and filling fuel tank
- 16 00 100 Checking fuel tank and tank ventilation system for leaks
- 16 00 102 Checking fuel tank and tank venting system for leaks with tank leakage diagnosis module (DM-TL)
- 16 00 510 Conducting leak test on fuel tank and tank ventilation system
- 16 11 130 Checking filler cap pressure relief valve
- Fuel tank with mounting
- 16 11 ... Removing and installing/replacing leak diagnosis pump (LDP) for tank leak diagnosis module (DM-TL) with grommet seal
- 16 11 ... Removing and installing/replacing overflow hose on cover pot
- 16 11 ... Removing and installing/replacing partition wall, retaining bracket and wheel arch trim
- 16 11 ... Removing and installing/replacing screw cap with rubber seal
- 16 11 ... Removing and installing/replacing tank cap with cover pot
- 16 11 ... Removing and installing/replacing vent hose from carbon canister to dust filter
- 16 11 ... Removing and installing/replacing vent hose from carbon canister to leak diagnosis pump (LDP)
- 16 11 030 Removing and installing/replacing fuel tank
- 16 11 060 Removing and installing/replacing fuel filler pipe
- 16 11 130 Checking filler cap pressure relief valve
- Fuel transfer sensor
- Fuel ventilation
- Fuel Pump
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.