Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
86 21... Removing rotary striker lock: Notes
The following text describes how to remove the rotary striker lock on the rear lid as an example. Proceed in the same way for the side lids. Remove the lock while the lid is open.
Release screws (1) and remove cover (2). On rear lid, remove red cap (3).
Installation, rear lid only:
Place red cap back on pull rod. Red cap serves to indicate rear lid emergency unlocking facility.
Remove spring nut (1) from pull rod (2).
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.