86 21... Removing plug for inside light: Notes

2013 Mini Cooper Countryman, Standard TransSECTION Notes
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Two different types of plugs are used for the inside light. Both types function in the same way, only their designs are different.

Type 1:

Release screw (1) and separate housing plug (2).

Fig 1: Identifying Housing Plug And Screw
G04766488Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) and disconnect cables (2) from screw clamp.

Fig 2: Identifying Cables And Screws
G04766489Courtesy of BMW OF NORTH AMERICA, INC.

Type 2:

Release screw (1) and separate housing plug (2).

Fig 3: Identifying Housing Plug And Screw
G04766490Courtesy of BMW OF NORTH AMERICA, INC.

Remove contact parts (1+2).

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.