Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSMINI2013COOPER COUNTRYMAN, STANDARD TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 2434 (STEERING AND WHEEL ALIGNMENT - REPAIR)ELECTRONIC CHASSIS ALIGNMENT32 00... IDENTIFYING SUSPENSION FROM LABEL ON FRONT AXLE

2013 Mini Cooper Countryman, Standard Trans

32 00... Identifying Suspension From Label On Front Axle

2013 Mini Cooper Countryman, Standard TransSECTION 32 00... Identifying Suspension From Label On Front Axle

WARNING: This page is about a different car, the 2010 BMW 135i, 2009 BMW 135i, and 2008 BMW 135i. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The type of suspension can be identified from the label on the spring strut/shock absorber.

Label:

BMW part number
Type of suspension

Fig 1: Identifying Suspension Label

Courtesy of BMW OF NORTH AMERICA, INC.

BA = Standard suspension (basic)
SP = Sport suspension or rough road package
HP = Performance sport suspension
60BAX = E60, E61 AWD
MSP = M Sport suspension
CHL = China Long
Optional extra 815 = rough road package

In the case of "SP" identification, there is a further distinction between:

Sport suspension without spacer ring (A)
Rough road package with spacer ring (A) above the support bearing

Fig 2: Identifying Spacer Ring

Courtesy of BMW OF NORTH AMERICA, INC.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.