Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMINI2013COOPER COUNTRYMAN, STANDARD TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 2424 (FUEL SUPPLY SYSTEM - REPAIR)
2013 Mini Cooper Countryman, Standard Trans
Section 2424 (Fuel Supply System - Repair)
2013 Mini Cooper Countryman, Standard TransSECTION Section 2424 (Fuel Supply System - Repair)
WARNING: This page is about a different car, the 2010 BMW 135i, 2009 BMW 135i, and 2008 BMW 135i. However, it is still accessible from the selected car via links, so may be relevant.
- Drawing Off Of Fuel, Supply System
- 16 00 General Function Description For Fuel Supply Systems
- 16 00... Fuel Supply System (Petrol/Gasoline)
- 16 00 005 Draining And Filling Fuel Tank
- 16 00 100 Checking Fuel Tank And Tank Ventilation System For Leaks
- 16 00 102 Checking Fuel Tank And Tank Venting System For Leaks With Tank Leakage Diagnosis Module (DMTL)
- 16 00 510 Conducting Leak Test On Fuel Tank And Tank Venting System
- Fuel Tank With Mounting
- 16 11 030 Removing And Installing Or Replacing Fuel Tank (Petrol/Gasoline)
- 16 11 060 Removing And Installing Or Replacing Fuel Filler Pipe
- 16 11 071 Replacing Rubber Sleeve Between Fuel Filler Pipe And Fuel Tank
- 16 11 130 Checking Filler Cap Pressure Relief Valve
- 16 11 350 Replacing Clamping Bands For Fuel Tank
- 16 14 070 Removing And Installing/Replacing Vent Hose With Strainer For Carbon Canister
- Fuel Delivery, Sensor For Display
- 16 12... Checking Repumping Function Of Suction-Jet Pump With BMW Diagnosis System
- 16 12 000 Removing And Installing Or Replacing Fuel Gauge Sensor (Petrol/Gasoline, Right)
- 16 12 001 Removing And Installing Or Replacing Fuel Gauge Sensor (Petrol/Gasoline, Left)
- 16 12 010 Removing And Installing Or Replacing Carbon Canister
- 16 12 010 Removing And Installing/Replacing Carbon Canister (DMTL)
- 16 14 016 Removing And Installing/Replacing Fuel Filter With Pressure Regulator
- Fuel DEAERATION
- Fuel Pump
- 16 14 010 Removing And Installing Or Replacing Fuel Pump (Petrol/Gasoline)
- 16 14 016 Removing And Installing/Replacing Fuel Filter With Pressure Regulator
- 16 14 060 Removing And Installing/Replacing Dust Filter For Tank Leak Diagnosis Module (DMTL)
- 16 14 070 Removing And Installing/Replacing Vent Hose With Strainer For Carbon Canister
- 16 14 500 Removing And Installing Or Replacing Control Unit For Electric Fuel Pump
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.