SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMINI2013COOPER COUNTRYMAN, STANDARD TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 2401 (ENGINE MECHANICAL)ENGINE11 4 340 PRESSURE-TESTING FIXTURE
2013 Mini Cooper Countryman, Standard Trans

11 4 340 Pressure-Testing Fixture

2013 Mini Cooper Countryman, Standard TransSECTION 11 4 340 Pressure-Testing Fixture
WARNING: This page is about a different car, the 2010 BMW 135i, 2009 BMW 135i, and 2008 BMW 135i. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: For pressure- testing cylinder head.

Engine: N51, N52, N53, N54

SI number: 1 17 04 (130)

Order number: 11 4 340

Pressure-testing fixture

Consisting of:

Fig 1: Identifying Pressure-Testing Fixture (11 4 340)
G04739126Courtesy of BMW OF NORTH AMERICA, INC.

1 = 11 4 341 Baseplate with seal

2 = 11 4 342 Plate with thrust member

3 = 11 4 343 Hose with air connection

4 = 11 4 344 Adapter plate with valve

NOTE: N54

5 = 11 4 345 Set of screws

NOTE: N54
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.