Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMINI2013COOPER COUNTRYMAN, STANDARD TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 2356 (FRONT AXLE - TIGHTENING TORQUES)SPRING STRUT31 31 SPRING STRUTS
2013 Mini Cooper Countryman, Standard Trans
31 31 Spring Struts
2013 Mini Cooper Countryman, Standard TransSECTION 31 31 Spring Struts
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
SPRING STRUTS - TIGHTENING TORQUE
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Support bearing / adapter (for rough road package) to body / adapter | E81, E82, E87, E88, E90, E91, E92, E93 | M8 | Replace nuts | 34 Nm |
| 2AZ Spring strut shock absorber to support bearing | E81, E82, E87, E88, E90, E91, E92, E93 | M12 | Replace nut | 64 Nm |
| 3AZ Swivel bearing to spring strut shock absorber | E81, E82, E87, E88, E90, E91, E92, E93 | M12 | Replace nut | 81 Nm |
| E92 / S65, E90 / S65, E93 / S65 | M10 | Replace nut | 45 Nm | |
| E92 / E90 / E93 / S65 | M10 | Replace nut | 45 Nm | |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.