64 53...Notes On Replacing Drier Bottle Or Drier Insert

2013 Mini Cooper Countryman, Standard TransSECTION 64 53...Notes On Replacing Drier Bottle Or Drier Insert
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

The drier bottle or drier insert does not have to be replaced at regular service intervals in a functioning, leakproof A/C system.

However, the drier bottle or drier insert must be replaced without fail in the event of: 

  • fouling of the refrigerant by filings/shavings (e.g. when the compressor is clamped).
  • a leaking A/C system or loss of refrigerant.
  • the refrigerant circuit being opened for a period exceeding 24 hours, e.g. during repair work.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.