Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
61 31 134 Removing and installing/replacing USB/audio interface connecting socket
Necessary preliminary tasks:
- Remove TRIM FOR STORAGE TRAY
Insert suitable screwdriver (1) through opening (2) in direction of arrow.
Press against connecting socket (3) in lower area.
Remove connecting socket (3) in direction of arrow.
Disconnect plug connection (1).
Installation:
- Retaining lug (3) must not be damaged.
- Make sure connecting socket (2) is correctly seated in storage compartment (4).
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.