Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
61 31 117 Removing and installing/replacing power window switch (driver side) (long version or from 03/2007)
Necessary preliminary tasks:
- Remove FRONT DOOR TRIM PANEL
- Remove HANDLE RECESS IN FRONT DOOR
Unlock catches (1) and remove switch for side window operation (2) downwards out of handle recess (3).
Installation:
Catch (1) must not be damaged.
Make sure rocker switch for side window operation (2) is installed in correct position.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.