Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMINI2013COOPER COUNTRYMAN, STANDARD TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 211 (CLUTCH - REPAIR)TORQUE SPECIFICATIONS
2013 Mini Cooper Countryman, Standard Trans
Torque Specifications
2013 Mini Cooper Countryman, Standard TransSECTION Torque Specifications
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2006 BMW X5, 2006 BMW X3, 2005 BMW X5, 2005 BMW X3, and 2005 BMW 645Ci. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |||
|---|---|---|---|---|
| Clutch Housing To Crankcase | ||||
| M8 | 20 (27) | |||
| M10 | 38 (51) | |||
| M12 | 63 (86) | |||
| Clutch To Flywheel (X3 & X5) | ||||
| M8/8.8 | 18 (25) | |||
| M8/10.9 | 25 (34) | |||
| Clutch To Flywheel (645Ci) | ||||
| M8/8.8 | 11 (15) (1) | |||
| Clutch Master Cylinder To Bearing Block | 16 (22) | |||
| Clutch Master Cylinder Fitting Screw | 16 (22) | |||
| Clutch Master Cylinder To Pedal Assembly | 88 (10) | |||
| Clutch Slave Cylinder To Clutch Housing/Transmission Case | 16 (22) | |||
| Hydraulic Pipes Coupling Bolts | 10 (14) | |||
| Hydraulic Unit Pressure Accumulator | 30 (40) | |||
|
||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.