Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
11 8 180 Holder
Minimum set: Mechanical tools
Note: Blocking flywheel when releasing and tightening down central bolts on vibration damper
Engine: M47T2, M47TU, M57T2, M57TU, M67, N43, N45, N45T, N46, N46T, N47, N47S, N51, N52, N53, N54, W17
Storage location: C45, C46
SI number: 1 12 99 (452)
Order number: 11 8 180
Holder
Consisting of:
2 = 11 8 182 Locking piece
3 = 11 8 183 Basic body
4 = 11 8 184 Adapter
5 = 11 8 185 Adapter with setting sleeve
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.