Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
52 17... Replacing padding for front seat thigh support
The work operations here are shown on the version with air conditioning and seat heating. Feed out seat cover (1) in area (2).
Installation:
Seat cover (1) is fastened by hooks in trim (3).
Remove plug connections (4) and feed out through trim (3).
Remove trim (3); if necessary, remove padding or cover.
Version with seat heating or air conditioning:
Feed out cable (1) and remove padding (2).
Installation:
Ensure correct cable routing (1).
Version with air conditioning:
- Remove separating net (1).
- Lift out fan (2).
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.