5.0 Approved Operating Fluids Sources

2013 Mini Cooper Countryman, Standard TransSECTION 5.0 Approved Operating Fluids Sources
WARNING: This page does not describe the selected car, but rather 92 other vehicles, including the 2010 BMW Z4, 2010 BMW X6, 2010 BMW X5, 2010 BMW X3, and 2010 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.
APPROVED OPERATING FLUIDS SOURCES REFERENCE

Group Description, S.I. Bulletin Product Name, Source Telephone
11 Engine Oil, SAE 5W-50 "Syntec FSX" Castrol Inc., Piscataway, NJ 732-980-9100
11 Oxygen Sensor Lubricant Bostik "Never-Seez" NSBT-16 Bostik Findley, Middleton, MA 888-603-8558
11 Intake & Vacuum System Leak Detector S.I. Bulletin B 11 03 92 (3500) "LiquiMoly (Lubro Moly) Motor Lecksucher" 2021 W.A.W.D. 800-477-9293
11 Cold Weld Epoxy "J-B Weld" J-B Weld Company, Sulphur Springs, TX 903-885-7696
13 Loctite 290 Throttle Housing Fasteners S.I. Bulletin B 13 06 91 (3440) "Loctite 290" Kem Krest, Inc., Elkhart, IN 800-285-5917
18 Copper Paste Exhaust System Joints S.I. Bulletin B 18 03 89 (1954) "8945" 3M Automotive Trades Division, Livonia, MI 800-521-8180
23 Synthetic Transmission Fluid "Mobil SHC 630" Mobil Oil Corporation 800-582-3645
34 Brake Component Lubricant S.I. Bulletins B 34 02 94 & B 34 05 98 Bostik "Never-Seez" NSBT-16 Bostik Findley, Middleton, MA 888-603-8558
36 Loctite 638 (green) Affix wheel hub covers "Loctite 680" Kem Krest, Inc., Elkhart, IN 800-285-5917
36 Loctite Cleaner 755 Loctite 242 M5 Wheel Covers S.I. Bulletin B 36 03 90 (3182) "Loctite Cleaning Solvent 755" "Loctite 242" Kem Krest, Inc., Elkhart, IN 800-285-5917
41 Structural Adhesive S.I. Bulletin B 41 01 95 (4150) "DP420 Epoxy Adhesive with 3M EPX Applicator" 3M Industrial Tapes and Specialties Division, Livonia, MI 800-521-8180
54 Renax GL1 "Poliplex #1" Fuchs Lubricants Corp., Harvey, IL 800-323-7755
61 Rubberized Super Glue "893 4103" Wurth USA, Inc., Ramsey, NJ 800-526-5228
62 Contact Cleaner Spray IC Acoustic Transmitter S.I. Bulletin B 62 04 92 (3539) "CRC QD Contact Cleaner Spray 5101" CRC Industries, Warminster, PA 800-272-8963
63 Silicone Gasket Material Turn Signals S.I. Bulletin B 63 05 91 (3313) "Permatex Form-A-Gasket 6B-80627" Kem Krest, Inc., Elkhart, IN 800-285-5917
64 AC System Disinfectant S.I. Bulletin B 64 08 91 (3373) "Airguard" J.J. Products, Inc., East Orange, NJ 800-654-2356
    "Airsept" The Auto Doctor, Tucker, GA 404-662-6778
64 AC System Treatment "893540-U" Wurth USA, Inc., Ramsey, NJ 800-526-5228
97 Brushable Seam Sealer Seals spot-welded, riveted, or bolted seams and joints. Brushable consistency remains flexible. Retains brush marks appearance. "8901021" Wurth USA, Inc., Ramsey, NJ 800-526-5228
97 Body Seal, Beige Underbody Seal, Black Permanent, flexible protection against stone chipping damage. Fast drying and paintable. "0892091 U" "0893075 U" Wurth USA, Inc., Ramsey, NJ 800-526-5228
97 Seam Sealer, Grey Fast drying, paintable, silicone-free sealant for special spray gun application. "0893228 U" Wurth USA, Inc., Ramsey, NJ 800-526-5228
99 Paint Cleaner "Machine Cleaner 1" and "Hi-Tech Cleaner 2" Meguiar's Inc., Irvine, CA 800-854-8073
99 Machine Glaze "Mirror Glaze 3" Meguiar's Inc., Irvine, CA 800-854-8073
99 Paint Sealer "Sealer and Reseal Glaze 7" Meguiar's Inc., Irvine, CA 800-854-8073
99 Paint Swirl Remover "Hi-Tech Swirl Remover 9" Meguiar's Inc., Irvine, CA 800-854-8073
99 Paint Carnauba Paste Wax "Hi-Tech Yellow Wax 26" Meguiar's Inc., Irvine, CA 800-854-8073
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.