Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMINI2013COOPER COUNTRYMAN, STANDARD TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1787 (MAINTENANCE AND GENERAL INFORMATION - OPERATING FLUIDS)3.0 CONVERSION TABLE
2013 Mini Cooper Countryman, Standard Trans
3.0 Conversion Table
2013 Mini Cooper Countryman, Standard TransSECTION 3.0 Conversion Table
WARNING: This page does not describe the selected car, but rather 92 other vehicles, including the 2010 BMW Z4, 2010 BMW X6, 2010 BMW X5, 2010 BMW X3, and 2010 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.
CONVERSION TABLE
| Liters | US Gallons | US Pints | Liters | US Gallons | US Pints |
|---|---|---|---|---|---|
| 0.5 | 0.132 | 1.055 | 8.0 | 2.112 | 16.904 |
| 1.0 | 0.264 | 2.113 | 9.0 | 2.376 | 19.017 |
| 2.0 | 0.538 | 4.226 | 10.0 | 2.640 | 21.130 |
| 3.0 | 0.792 | 6.339 | 11.0 | 2.904 | 23.243 |
| 4.0 | 1.056 | 8.452 | 12.0 | 3.168 | 25.356 |
| 5.0 | 1.320 | 10.565 | 13.0 | 3.432 | 27.469 |
| 6.0 | 1.584 | 12.678 | 14.0 | 3.696 | 29.582 |
| 7.0 | 1.848 | 14.791 | 15.0 | 3.960 | 31.695 |
Conversion Factors:
Liters in US Gallons x 0.264
US Gallons in Liters x 3.785
Liters in US Pints x 2.113
US Pints in Liters x 0.473
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.