Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Cruise control
The Active Cruise Control option differentiates between 2 driving conditions:
- Cruise control with specified set speed
A selected set speed (in the range 30 km/h - 180 km/h) is automatically maintained on open roads without vehicles driving ahead.
- Cruise control with speed adapted to that of vehicle driving ahead
If a slower vehicle is detected on the vehicle's own track, the vehicle's own speed will be adapted to that of the vehicle driving ahead
At the same time, a distance from this vehicle preset by the driver is established (4 fixed, timed separations can be selected).
The timed separation from a vehicle driving ahead is no less than 1 second under stationary conditions. In certain conditions (e.g. when a vehicle cuts in a short distance ahead), this timed separation may briefly be less than 1 second.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.