Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Absence of ID transmitter
The following exceptional circumstances could arise:
The engine must be running. The ID transmitter is removed from the vehicle.
Example: After changing drivers, the front passenger leaves the vehicle, taking the ID transmitter with him.
- The engine is not automatically switched off as an automatic engine shutdown is prohibited by law.
- If a door is opened and then closed again, a Check-Control message will appear.
- When the engine is switched off, the engine can be restarted within the space of 10 seconds.
This possibility is important, for example if the engine is switched off at a level crossing and there is no ID transmitter inside the vehicle
For safety, it is advisable to carry the spare key with you. In conjunction with the adapter, the spare key allows drive authorization. This means that the vehicle can still be driven, even without an ID transmitter.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.