12 7 200 Set of tools

2013 Mini Cooper Countryman, Standard TransSECTION 12 7 200 Set of tools
WARNING: This page is about a different car, the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, and 2007 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Note: For opening & closing control unit box

Storage location: J 106

Order number: 12 7 200

Set of tools

Consisting of:

1 = 12 7 201 Pliers

Note: For bending open tab washers

2 = 12 7 202 Lever

Note: For bending tab washers

3 = 12 7 203 Pliers

Note: For closing tab washers

4 = 12 7 204 Torx socket T20

5 = 12 7 205 Torx socket T10

6 = 12 7 206 Fine pen

Note: Black, waterproof

8 = 12 7 208 Slotted screwdriver 2 mm

9 = 12 7 209 Straightening tool

Note: For Eprom connections

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.