86 21 ... Installing Rubber Roof Strip

2013 Mini Cooper Countryman, Standard TransSECTION 86 21 ... Installing Rubber Roof Strip
WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Pull off old rubber roof strip and remove remaining traces of adhesive with universal cleaner, refer to BMW Operating Fluids. Rub down with a dry cloth.

Select rubber roof strip according to length of roof recess (1). Arrange chamfered ends of rubber roof strip to match shape of roof recess (1).

Installation: 

Pretreat bonding area and stick on rubber roof strip according to manufacturer's instructions.

Fig 1: Identifying Roof Recess
G04766473Courtesy of BMW OF NORTH AMERICA, INC.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.