86 21 ... Adjusting Side Lid To Fit

Height adjustment of side lid:

Release screws (1) and move side lid in direction of arrows.

Installation: 

Tightening Torque, refer to86 21 HOOD .

Fig 1: Moving Side Lid

Courtesy of BMW OF NORTH AMERICA, INC.

Depth adjustment of side lid:

Release screws (1) and move side lid in direction of arrows.

Installation: 

Tightening Torque, refer to 86 21 HOOD .

Fig 2: Moving Side Lid

Courtesy of BMW OF NORTH AMERICA, INC.

Adjust gap (A) evenly all around and correct if necessary.

Fig 3: Adjusting Gap

Courtesy of BMW OF NORTH AMERICA, INC.

Check lid in transition (B) to hood for displacement and correct if necessary (flush).

Fig 4: Checking Lid

Courtesy of BMW OF NORTH AMERICA, INC.

To align lid in direction of travel, you can install or remove a spacer plate (3) between mounting bracket (1) and hinge (2).

Fig 5: Identifying Spacer Plate, Mounting Bracket And Hinge

Courtesy of BMW OF NORTH AMERICA, INC.

Check lid in transition (C) to hood for displacement and correct if necessary (flush). Correction is made by inserting or omitting spacer plates (refer to Fig. R86 0201Fig 5).

Fig 6: Checking Lid

Courtesy of BMW OF NORTH AMERICA, INC.