86 10 ... Disassembly of Left And Right Wheel Boxes

2013 Mini Cooper Countryman, Standard TransSECTION 86 10 ... Disassembly of Left And Right Wheel Boxes
WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Remove sealing compound (1).

Drill out rivets (2).

Raise side apron (3). Pull out wheel box (4) towards rear.

Installation: 

Use Sikaflex 221 as sealing compound.

Fig 1: Identifying Sealing Compound, Rivets, Side Apron And Wheel Box
G04766337Courtesy of BMW OF NORTH AMERICA, INC.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.