Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMINI2013COOPER COUNTRYMAN, STANDARD TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1542 (FRONT AXLE - TIGHTENING TORQUES)31 SPRING STRUT31 31 SPRING STRUTS
2013 Mini Cooper Countryman, Standard Trans
31 31 Spring Struts
2013 Mini Cooper Countryman, Standard TransSECTION 31 31 Spring Struts
WARNING: This page does not describe the selected car, but rather 17 other vehicles, including the 2008 BMW 760Li, 2007 BMW 760Li, 2006 BMW 760i, 2006 BMW 760Li, and 2005 BMW 760i. However, it is still accessible from the selected car via links, so may be relevant.
SPRING STRUTS TIGHTENING TORQUES
| - | Type | Thread | Tightening specification | Measure |
|---|---|---|---|---|
| 1AZ Spring strut support bearing / adapter for rough road package to wheel arch / adapter for rough road package | E60, E61, E63, E64, E65, E66, E67, E83, E85, E86 | Flanged hexagon nut | Replace nuts | 34 Nm |
| - | E28, E30, E31, E32, E34, E36 / S50 / S52, E38, E39 | Hexagon flange nut dia. 18 mm | Replace nuts | 24 Nm |
| - | E36 / S50 / S52 | Flanged hexagon nut dia. 21 mm | Replace nuts and secure with Loctite 242 | 27 Nm |
| - | E32, E34, E36, E46, E53 | Flanged hexagon nut dia. 21 mm | Replace nuts | 34 Nm |
| - | E52 | Hexagon flange nut dia. 18 mm | Replace nuts | 28 Nm |
| 2AZ Shock absorber piston rod on thrust bearing | E12, E21, E23, E24 / until 5.82 | - | - | 80 Nm |
| - | E24 / from 5.82, E30, E31, E32, E34 | M12 (with external hexagon piston rod) | - | 64 Nm |
| - | E24 / from 5.82, E30, E31, E32, E34 | M12 (with internal hexagon piston rod) | - | 44 Nm |
| - | E36, E38, E39, E46, E52, E53, E60, E61, E63, E64, E65, E66, E67, E83, E85, E86 | - | Replace nut | 64 Nm |
| 3AZ Spring strut shock absorber to pivot mount | E34 / Four Wheel Drive | - | - | 80 Nm |
| - | E53 | - | Replace screw & nut | 250 Nm |
| - | E52, E60 / except AWD, E61 / except AWD, E63, E64, E65, E66 | - | Replace screw & nut | 81 Nm |
| - | E60 / Four Wheel Drive, E61 / Four Wheel Drive, E67, E83 | - | Replace screw & nut | 100 Nm |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.