Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMINI2013COOPER COUNTRYMAN, STANDARD TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1453 (MAINTENANCE AND GENERAL INFORMATION - REPAIR)00 MAINTENANCE AND GENERAL INFORMATION00 00 ... CHECKING LIGHTING SYSTEM
2013 Mini Cooper Countryman, Standard Trans
00 00 ... Checking lighting system
2013 Mini Cooper Countryman, Standard TransSECTION 00 00 ... Checking lighting system
WARNING: This page is about a different car, the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, and 2007 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
- Check lighting system for correct operation:
- Check headlights, rear lights and associated telltale/indicator lamps
- Check sidelamps, parking lights, dipped-beam and main-beam headlights for correct operation
- Check headlight flasher for correct operation
- Check signal horn
- Check left/right direction indicators and hazard warning system for correct operation
- Check brake lights for correct operation
- Check reversing lights and license plate lights for correct operation
- Check front and rear fog lights for correct operation
- Check inside light on interior rearview mirror for correct operation
- Check instrument and indication field lighting
NOTE:
Perform a check of headlight adjustment only at the customer's request and issue a separate invoice.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.