Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
61 31 115 Replacing Rocker Switch For Side-Window Operation
Special tools required:
- 00 9 341
Carefully lever out rocker switch for side window operation (1) with special tool 00 9 341 at specified points (2).
Remove rocker switch for side window operation (1) from door trim panel (3) slightly.
Disconnect associated plug connection and remove rocker switch for side window operation (1).
Installation:
Retaining clips (1) of rocker switch for side window operation (2) must not be damaged.
Make sure rocker switch for side window operation (2) is correctly seated.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.