SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMINI2013COOPER COUNTRYMAN, STANDARD TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1289 (GENERAL ELECTRICAL SYSTEM - REPAIR)13 PLUG CONNECTION, TERMINALS, FUSE BOX61 13 ... PLUG HOUSING, LCC CONTACT (LOAD CURRENT CONTACT)
2013 Mini Cooper Countryman, Standard Trans

61 13 ... Plug Housing, LCC Contact (Load Current Contact)

2013 Mini Cooper Countryman, Standard TransSECTION 61 13 ... Plug Housing, LCC Contact (Load Current Contact)
WARNING: This page is about a different car, the 2010 BMW 650i, 2009 BMW 650i, 2008 BMW 650i, 2007 BMW 650i, and 2006 BMW 650i. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required: 

  • 61 0 317 

Socket housing: 

Press lock (1) with suitable tool (2) in direction of arrow out of socket housing (3).

Fig 1: Pressing Lock With Suitable Tool
G04727532Courtesy of BMW OF NORTH AMERICA, INC.

Pull lock (1) out of socket housing (2).

Fig 2: Identifying Lock & Socket Housing
G04727533Courtesy of BMW OF NORTH AMERICA, INC.

Insert special tool 61 0 317  into socket housing (1) and pull out lead with LCC contact (2) in direction of arrow.

Fig 3: Identifying Special Tool (61 0 317)
G04727534Courtesy of BMW OF NORTH AMERICA, INC.

Pin housing: 

Unlock locking slide (1) of pin housing (2) with suitable tool (3) in direction of arrow.

Fig 4: Identifying Locking Slide, Pin Housing And Tool
G04727535Courtesy of BMW OF NORTH AMERICA, INC.

Insert special tool 61 0 317  into pin housing (1) and pull out lead with LCC contact (2) in direction of arrow.

Fig 5: Identifying Special Tool (61 0 317)
G04727536Courtesy of BMW OF NORTH AMERICA, INC.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.