32 00... Moving vehicle into normal position

2013 Mini Cooper Countryman, Standard TransSECTION 32 00... Moving vehicle into normal position
WARNING: This page is about a different car, the 2010 BMW M5, 2009 BMW M5, 2008 BMW M5, 2007 BMW M5, and 2006 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks: 

  • Check compliance with TEST CONDITIONS , bring vehicle to a stop if necessary.
  • Version with air spring system: Carry out ride-height-calibration
  • Check vehicle interior and luggage compartment (incl. luggage compartment recess) for load, unload vehicle if necessary
  • Introduce DIN load into vehicle (refer to TECHNICAL DATA ).
  • Determine VEHICLE RIDE HEIGHT
    NOTE: If the vehicle ride height is not inside the tolerance (refer to TECHNICAL DATA ), the vehicle must be repaired.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.