Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMINI2013COOPER COUNTRYMAN, STANDARD TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 127 (AXLE SHAFTS - REPAIR)TORQUE SPECIFICATIONS
2013 Mini Cooper Countryman, Standard Trans
Torque Specifications
2013 Mini Cooper Countryman, Standard TransSECTION Torque Specifications
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW Z4, 2007 BMW Z4, 2006 BMW Z4, 2005 BMW Z4, and 2004 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |||
|---|---|---|---|---|
| Axle Shaft Collar Nut (Bearing Unit) | 213 (290) | |||
| Axle Shaft-To-Differential & Drive Flange | ||||
| 8 mm Black With Ribbed Teeth | 47 (64) | |||
| 8 mm Silver With Ribbed Teeth | 38 (52) | |||
| 10 mm Fillister Or Torx Head | 61 (83) | |||
| 10 mm With Locking Teeth | 71 (96) | |||
| 10 mm Black With Ribbed Teeth | 74 (100) | |||
| 10 mm Silver With Ribbed Teeth | 59 (80) | |||
| 12 mm With Locking Teeth | 81 (110) | |||
| 12 mm With Ribbed Teeth | 100 (135) | |||
| Bracket Stabilizer Link-To-Upper Control Arm | 16 (22) | |||
| Reinforcing Plate/Tension Strut-To-Rear Axle | (1) 44 (59) |
|||
| Reinforcing Plate-To-Rear Axle | 15 (21) | |||
| Retaining Bracket, Stabilizer Bar-To-Rear Axle Support | 16 (22) | |||
| Tension Strut-To-Rear Axle | 18 (24) | |||
| Wheel Lug Nut | 81-96 (110-130) | |||
|
||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.