Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSMINI2013COOPER COUNTRYMAN, STANDARD TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1261 (FRONT AXLE - TECHNICAL DATA)00 GENERAL31 00 FRONT AXLE - RIDE HEIGHT E60 LONG VERSION

2013 Mini Cooper Countryman, Standard Trans

31 00 Front Axle - Ride Height E60 Long Version

2013 Mini Cooper Countryman, Standard TransSECTION 31 00 Front Axle - Ride Height E60 Long Version

WARNING: This page is about a different car, the 2007 BMW 550i and 2006 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

TECHNICAL DATA - FRONT AXLE - RIDE HEIGHT E60 LONG VERSION (31 00)

Ride level height in normal position Attach tape measure to bottom middle of rim flange and measure to lower edge of wheel arch
Tolerance ride height in normal position 10 mm. See 32 00... MOVE VEHICLE INTO NORMAL POSITION . design position 2 mm. See 32 00... MOVING VEHICLE INTO DESIGN POSITION .
Difference ride height between left/right in normal position 10 mm. See 32 00... MOVE VEHICLE INTO NORMAL POSITION . design position 2 mm. See 32 00... MOVING VEHICLE INTO DESIGN POSITION .
Series	mm
16" rim	mm	- -
17" rim	mm	610
18" rim	mm	- -
19" rim	mm	- -
Low-slung sport suspension
16" rim		- -
17" rim		- -
18" rim		- -
19" rim		- -

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.