Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
11 6 360 Extractor
Minimum set: Mechanical tools
In conjunction with: 11 2 383, 11 2 386
For removing rotary shaft seal from timing case cover
Engine: M47, M47TU, S65, S85
Storage location: B11
SI number: 1 06 98 (306)
Order number: 11 6 360
Extractor
Consisting of:
1 = 11 6 361 Threaded bell housing
2 = 11 6 362 Spindle M12 x 100
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.