SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMINI2013COOPER COUNTRYMAN, STANDARD TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1146 (ENGINE - SPECIAL TOOLS)11 ENGINE11 5 230 PRESSURE-TESTING FIXTURE
2013 Mini Cooper Countryman, Standard Trans

11 5 230 Pressure-Testing Fixture

2013 Mini Cooper Countryman, Standard TransSECTION 11 5 230 Pressure-Testing Fixture
WARNING: This page does not describe the selected car, but rather 22 other vehicles, including the 2010 BMW M6, 2010 BMW M5, 2009 BMW M6, 2009 BMW M5, and 2009 BMW 650i. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

For testing cylinder heads for leaks.

Engine: S85

SI number: 1 02 05 (173)

Order number: 11 5 230

Pressure-testing fixture

Consisting of:

1 = 11 5 231 Base plate with seal

2 = 11 5 232 Seal for base plate

3 = 11 5 233 Adapter plate with seals

4 = 11 5 234 Seals for adapter plate

5 = 11 5 235 Adapter plate with seal

6 = 11 5 236 Seal for adapter plate

7 = 11 5 237 Set of screws (4 x)

Fig 1: Identifying Pressure Test Fixture (11 5 230)
G04226382Courtesy of BMW OF NORTH AMERICA, INC.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.