Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
11 1 210 Extractor
Minimum set: Mechanical tools
In conjunction with: 11 2 383
For rotary shaft seal in timing case cover
Engine: M47T2, M47TU, M57, M57D25, M57D30, M57T2, M57TU, M70, M73, S85
Storage location: B34, C27
SI number: 1 02 87(721)
Order number: 11 1 210
Extractor
Consisting of:
1 = 11 1 211 Extractor
2 = 11 1 212 Thrust piece
For insertion into crankshaft when removing shaft seal from gear case cover / Engine: M57
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.