Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMINI2013COOPER COUNTRYMAN, STANDARD TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1031 (OPERATING FLUIDS - MAINTENANCE & GENERAL INFORMATION)5.0 APPROVED OPERATING FLUIDS SOURCES
2013 Mini Cooper Countryman, Standard Trans
5.0 Approved Operating Fluids Sources
2013 Mini Cooper Countryman, Standard TransSECTION 5.0 Approved Operating Fluids Sources
WARNING: This page does not describe the selected car, but rather 210 other vehicles, including the 2006 BMW Z4, 2006 BMW X5, 2006 BMW X3, 2006 BMW M6, and 2006 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
APPROVED OPERATING FLUIDS SOURCES
| Group | Description, S.I. Bulletin | Product Name, Source |
|---|---|---|
| 11 | OPERATING FLUIDS - ENGINE | Castrol Inc., Piscataway, NJ |
| 11 | Oxygen Sensor Lubricant | Bostik "Never-Seez" NSBT-16 Bostik Findley, Middleton, MA |
| 11 | Intake & Vacuum System Leak Detector S.I. Bulletin B 11 03 92 (3500) |
"LiquiMoly (Lubro Moly) Motor Lecksucher" 2021 W.A.W.D. |
| 11 | Cold Weld Epoxy | "J-B Weld" J-B Weld Company, Sulphur Springs, TX |
| 13 | Loctite 290 Throttle Housing Fasteners S.I. Bulletin B 13 06 91 (3440) |
"Loctite 290" Kem Krest, Inc., Elkhart, IN |
| 18 | Copper Paste Exhaust System Joints S.I. Bulletin B 18 03 89 (1954) |
" 8945" 3M Automotive Trades Division, Livonia, MI |
| 23 | Synthetic Transmission Fluid | "Mobil SHC 630" Mobil Oil Corporation |
| 34 | Brake Component Lubricant S.I. Bulletins B 34 02 94 & B 34 05 98 |
Bostik "Never-Seez" NSBT-16 Bostik Findley, Middleton, MA |
| 36 | Loctite 638 (green) Affix wheel hub covers |
"Loctite 680" Kem Krest, Inc., Elkhart, IN |
| 36 | Loctite Cleaner 755 Loctite 242 M5 Wheel Covers S.I. Bulletin B 36 03 90 (3182) |
"Loctite Cleaning Solvent 755" "Loctite 242" Kem Krest, Inc., Elkhart, IN |
| 41 | Structural Adhesive S.I. Bulletin B 41 01 95 (4150) |
"DP420 Epoxy Adhesive with 3M EPX Applicator" 3M Industrial Tapes and Specialties Division, Livonia, MI |
| 54 | Renax GL1 | "Poliplex #1" Fuchs Lubricants Corp., Harvey, IL |
| 61 | Rubberized Super Glue | " 893 4103" Wurth USA, Inc., Ramsey, NJ |
| 62 | Contact Cleaner Spray IC Acoustic Transmitter S.I. Bulletin B 62 04 92 (3539) |
"CRC QD Contact Cleaner Spray 5101" CRC Industries, Warminster, PA |
| 63 | Silicone Gasket Material Turn Signals S.I. Bulletin B 63 05 91 (3313) |
"Permatex Form-A-Gasket 6B-80627" Kem Krest, Inc., Elkhart, IN |
| 64 | AC System Disinfectant S.I. Bulletin B 64 08 91 (3373) |
"Airguard" J.J. Products, Inc., East Orange, NJ |
| "Airsept" The Auto Doctor, Tucker, GA |
||
| 64 | AC System Treatment | " 893540-U" Wurth USA, Inc., Ramsey, NJ |
APPROVED OPERATING FLUIDS SOURCES
| Group | Description, S.I. Bulletin | Product Name, Source |
|---|---|---|
| 97 | Brushable Seam Sealer Seals spot-welded, riveted, or bolted seams and joints. Brushable consistency remains flexible. Retains brush marks appearance. |
" 8901021" Wurth USA, Inc., Ramsey, NJ |
| 97 | Body Seal, Beige Underbody Seal, Black Permanent, flexible protection against stone chipping damage. Fast drying and paintable. |
" 0892091 U" " 0893075 U" Wurth USA, Inc., Ramsey, NJ |
| 97 | Seam Sealer, Grey Fast drying, paintable, silicone-free sealant for special spray gun application. |
" 0893228 U" Wurth USA, Inc., Ramsey, NJ |
| 99 | Paint Cleaner | "Machine Cleaner 1" and "Hi-Tech Cleaner 2" Meguiar's Inc., Irvine, CA |
| 99 | Machine Glaze | "Mirror Glaze 3" Meguiar's Inc., Irvine, CA |
| 99 | Paint Sealer | "Sealer and Reseal Glaze 7" Meguiar's Inc., Irvine, CA |
| 99 | Paint Swirl Remover | "Hi-Tech Swirl Remover 9" Meguiar's Inc., Irvine, CA |
| 99 | Paint Carnauba Paste Wax | "Hi-Tech Yellow Wax 26" Meguiar's Inc., Irvine, CA |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.