Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMINI2008COOPER S CLUBMAN (R55) L4-1.6L TURBO (N14)REPAIR AND DIAGNOSISRELAYS AND MODULESRELAYS AND MODULES - BRAKES AND TRACTION CONTROLTRACTION CONTROL MODULETECHNICAL SERVICE BULLETINSCOMPUTER/CONTROLS - ISTA/P(R) - ENABLING CODE INFORMATION
2008 Mini Cooper S Clubman (R55) L4-1.6L Turbo (N14)
Computer/Controls - ISTA/P(R) - Enabling Code Information
2008 Mini Cooper S Clubman (R55) L4-1.6L Turbo (N14)SECTION Computer/Controls - ISTA/P(R) - Enabling Code Information
SI M09 02 11
Programming/Coding Explanations
March 2012
Technical Service
This Service Information bulletin supersedes SI M09 02 11 dated July 2011.
[NEW] designates changes to this revision
SUBJECT
Enabling Code Information
MODEL
R56 (Cooper, Cooper S)
R55 (Cooper Clubman, Cooper S Clubman)
R57 (Cooper Convertible, Cooper S Convertible)
R60 (Cooper Countryman, Cooper S Countryman)
SITUATION
When ISTA/P requests an enabling code during a programming session, the requested enabling codes can only be distinguished by Application ID and Upgrade Index. There is no further information on which function or feature in the vehicle needs the particular codes.
INFORMATION
When ISTA/P requests an enabling code during a programming session, only an Application ID and Upgrade Index are shown. The attached cross-reference will help identify which enabling code is required:
[NEW] M090211_FSC_Enabling_Codes.pdf
For further information on the use of enabling codes, refer to SI M09 01 11.
WARRANTY INFORMATION
Not applicable
ATTACHMENT
M090211_FSC_Enableing_Codes
Programming/Coding Explanations
March 2012
Technical Service
This Service Information bulletin supersedes SI M09 02 11 dated July 2011.
[NEW] designates changes to this revision
SUBJECT
Enabling Code Information
MODEL
R56 (Cooper, Cooper S)
R55 (Cooper Clubman, Cooper S Clubman)
R57 (Cooper Convertible, Cooper S Convertible)
R60 (Cooper Countryman, Cooper S Countryman)
SITUATION
When ISTA/P requests an enabling code during a programming session, the requested enabling codes can only be distinguished by Application ID and Upgrade Index. There is no further information on which function or feature in the vehicle needs the particular codes.
INFORMATION
When ISTA/P requests an enabling code during a programming session, only an Application ID and Upgrade Index are shown. The attached cross-reference will help identify which enabling code is required:
[NEW] M090211_FSC_Enabling_Codes.pdf
For further information on the use of enabling codes, refer to SI M09 01 11.
WARRANTY INFORMATION
Not applicable
ATTACHMENT
M090211_FSC_Enableing_Codes
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.