Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMINI2008COOPER S CLUBMAN (R55) L4-1.6L TURBO (N14)REPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTPROM - PROGRAMMABLE READ ONLY MEMORYTECHNICAL SERVICE BULLETINSALL TECHNICAL SERVICE BULLETINSPROGMAN(R) - PROGRAMMING/CODING/INDIVIDUALIZATION
2008 Mini Cooper S Clubman (R55) L4-1.6L Turbo (N14)
Progman(R) - Programming/Coding/Individualization
2008 Mini Cooper S Clubman (R55) L4-1.6L Turbo (N14)SECTION Progman(R) - Programming/Coding/Individualization
SI M 09 01 07
Programming/Coding Explanations
August 2008
Technical Service
This Service Information bulletin supersedes SIM09 01 07 dated March 2007.
[NEW] designates changes to this revision
SUBJECT
Programming, Coding, Individualization with Progman
MODEL
All
SITUATION
Progman is the service application for programming, coding and individualization.
Individualization regarding Progman includes Car and Key Memory (CKM) and retrofits.
The Progman application runs on the Software Service Station (SSS).
Updates are available either as Online Updates or on DVD.
[NEW] PROCEDURE
Complete Progman documentation can be found in the online documentation in Progman.
This documentation also contains E-Series related data and retrofit procedures.
This online documentation can be accessed from the Progman main screen by selecting the button with the book symbol on it.
For detailed information on Progman procedures, refer to the attachments.
ATTACHMENTS
view PDF attachment M090107General_Rules.
view PDF attachment M090107Proc_A_Module_Replacement
view PDF attachment M090107Proc_B_Software_Update.
view PDF attachment M090107Proc_C_Troubleshooting.
view PDF attachment M090107Proc_E_Coding.
General Rules for Programming
Procedure A - Module Replacement
Procedure B - Software Update
Procedure C - Troubleshooting (Index)
Procedure C - Troubleshooting (1 thru 3)
Procedure C - Troubleshooting (4 thru 5)
Procedure C - Troubleshooting (Illustrations and Tables)
Procedure E - Coding
Programming/Coding Explanations
August 2008
Technical Service
This Service Information bulletin supersedes SIM09 01 07 dated March 2007.
[NEW] designates changes to this revision
SUBJECT
Programming, Coding, Individualization with Progman
MODEL
All
SITUATION
Progman is the service application for programming, coding and individualization.
Individualization regarding Progman includes Car and Key Memory (CKM) and retrofits.
The Progman application runs on the Software Service Station (SSS).
Updates are available either as Online Updates or on DVD.
[NEW] PROCEDURE
Complete Progman documentation can be found in the online documentation in Progman.
This documentation also contains E-Series related data and retrofit procedures.
This online documentation can be accessed from the Progman main screen by selecting the button with the book symbol on it.
For detailed information on Progman procedures, refer to the attachments.
ATTACHMENTS
view PDF attachment M090107General_Rules.
view PDF attachment M090107Proc_A_Module_Replacement
view PDF attachment M090107Proc_B_Software_Update.
view PDF attachment M090107Proc_C_Troubleshooting.
view PDF attachment M090107Proc_E_Coding.
General Rules for Programming
Procedure A - Module Replacement
Procedure B - Software Update
Procedure C - Troubleshooting (Index)
Procedure C - Troubleshooting (1 thru 3)
Procedure C - Troubleshooting (4 thru 5)
Procedure C - Troubleshooting (Illustrations and Tables)
Procedure E - Coding
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.