23 .. ... Universal MINI Transmission Bracket

2008 Mini Cooper Clubman (R55) L4-1.6L (N12)SECTION 23 .. ... Universal MINI Transmission Bracket



23 ... - Universal MINI transmission bracket





Special tools required:
- 00 2 030 00 2 030 Universal Hydro-Lifter Basic Unit
- 23 4 150 23 4 150 Universal Transmission Bracket





Note:
- Suitable for manual and automatic transmissions





Important!
Supports (1) can be laterally adjusted by means of screws (2).
Carrier (3) of rear supports (1) can be longitudinally adjusted by means of screw.
Supports must be adapted in length and width to the transmission.





Supporting transmission:
Support transmission with special tools 23 4 150 23 4 150 Universal Transmission Bracket, 00 2 030 00 2 030 Universal Hydro-Lifter Basic Unit.
Joint (1) for height adjustment.
Joint (2) for inclination angle adjustment.

Important!
Transmission must be secured with tensioning strap (3).
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.