Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
2008 Mini Cooper Clubman (R55) L4-1.6L (N12)
Maintenance: Labor Times
2008 Mini Cooper Clubman (R55) L4-1.6L (N12)SECTION Labor Times
| Standard Hours | Manufacturer Warranty Hours | Skill Level | Notes | |
| Service or Charge | ||||
| Condition Based Service | ||||
| Engine Oil Service | 0.3 | 0.0 | C | Inclusive item: Check function of parking brake. |
| Service, Automatic Transmission Fluid | 1.0 | 0.0 | B | |
| Service, Front Brakes | 0.7 | 0.0 | B | |
| Service, Microfilter | 0.2 | 0.0 | C | |
| Service, Rear Brakes | 0.9 | 0.0 | B | |
| Service, Spark Plug | 0.3 | 0.0 | B | |
| Service, Vehicle Check | 0.6 | 0.0 | C | Inclusive items: Check battery. |
| Supplemental Service Items Based on Time or Mileage | ||||
| Annual Low Mileage Oil Service | 0.4 | 0.0 | C | |
| Every Two Years | ||||
| Brake Fluid Service | 0.4 | 0.0 | C | |
| Normal Service | ||||
| 15,000 Miles | 0.5 | 0.0 | C | |
| 30,000 Miles | 2.7 | 0.0 | B | |
| 45,000 Miles | 0.5 | 0.0 | C | |
| 60,000 Miles | 1.8 | 0.0 | B | |
| 75,000 Miles | 0.5 | 0.0 | C | |
| 90,000 Miles | 2.7 | 0.0 | B | |
| 100,000 Miles | ||||
| With Automatic Transmission | 1.3 | 0.0 | B | |
| With Manual Transmission | 0.3 | 0.0 | B | |
| 105,000 Miles | 0.5 | 0.0 | C | |
| 120,000 Miles | 3.2 | 0.0 | B | |
| 135,000 Miles | 0.5 | 0.0 | C | |
| 150,000 Miles | 2.7 | 0.0 | B |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.