Alignment Specifications

2006 Mercury Grand Marquis V8-4.6L VIN WSECTION Alignment Specifications


ALIGNMENT SPECIFICATIONS

(BASE)/COIL SPRING REAR
CASTER
LH 6.2° ± 0.75°
RH 6.5° ± 0.75°
Total/Split -0.3° ± 0.75°

CAMBER
LH -0.40° ± 0.75°
RH -0.40° ± 0.75°
Total/Split 0° ± 0.75°

TOE
LH ---
RH ---
Total/Split -0.15° ± 0.20°

NOTE: Toe @ curb ride height (positive value is toe-in, negative value is toe-out)

AIR SUSPENSION
CASTER
LH 6.5° ± 0.75°
RH 6.8° ± 0.75°
Total/Split -0.3° ± 0.75°

CAMBER
LH -0.40° ± 0.75°
RH -0.40° ± 0.75°
Total/Split 0° ± 0.75°

TOE
LH ---
RH ---
Total/Split -0.15° ± 0.20°

NOTE: Toe @ curb ride height (positive value is toe-in, negative value is toe-out)

POLICE/TAXI/FLEET
CASTER
LH 6.0° ± 0.75°
RH 6.3° ± 0.75°
Total/Split -0.3° ± 0.75°

CAMBER
LH -0.40° ± 0.75°
RH -0.40° ± 0.75°
Total/Split 0° ± 0.75°

TOE
LH ---
RH ---
Total/Split -0.15° ± 0.20°

NOTE: Toe @ curb ride height (positive value is toe-in, negative value is toe-out)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.