Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMERCURY2006GRAND MARQUIS V8-4.6L VIN WREPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSTESTING AND INSPECTIONSCAN TOOL TESTING AND PROCEDURESPARAMETER IDENTIFICATION (PID)
2006 Mercury Grand Marquis V8-4.6L VIN W
Parameter Identification (PID)
2006 Mercury Grand Marquis V8-4.6L VIN WSECTION Parameter Identification (PID)
PARAMETER IDENTIFICATION (PID)
Description
The parameter identification (PID) mode allows access to PCM information. This includes analog and digital signal inputs and outputs along with calculated values and the system status. There are two types of PID lists available and both are used. The first is the generic (J1979) OBD PID list. This is a standard set of PIDs that all diagnostic tools must be able to access. The second is a Ford specific (J2190) list which can be accessed by an appropriate diagnostic tool. When accessing any of these PIDs, the values will be continuously updated. The generic or Ford PID list provides definitions and values in appropriate units. For more information, refer to the Society of Automotive Engineers (SAE) document J2205.
Generic OBD PID List
FORD PID List
Description
The parameter identification (PID) mode allows access to PCM information. This includes analog and digital signal inputs and outputs along with calculated values and the system status. There are two types of PID lists available and both are used. The first is the generic (J1979) OBD PID list. This is a standard set of PIDs that all diagnostic tools must be able to access. The second is a Ford specific (J2190) list which can be accessed by an appropriate diagnostic tool. When accessing any of these PIDs, the values will be continuously updated. The generic or Ford PID list provides definitions and values in appropriate units. For more information, refer to the Society of Automotive Engineers (SAE) document J2205.
Generic OBD PID List (Part 1):
Generic OBD PID List (Part 2):
Generic OBD PID List
Ford PID List (Part 1):
Ford PID List (Part 2):
Ford PID List (Part 3):
Ford PID List (Part 4):
Ford PID List (Part 5):
Ford PID List (Part 6):
FORD PID List
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.