Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMERCURY2004SABLE V6-3.0L DOHC VIN SREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSBRAKES AND TRACTION CONTROLDISC BRAKE SYSTEMSYSTEM SPECIFICATIONSFRONT DISC BRAKESGENERAL SPECIFICATIONS
2004 Mercury Sable V6-3.0L DOHC VIN S
General Specifications
2004 Mercury Sable V6-3.0L DOHC VIN SSECTION General Specifications
Brake Pads
Brake pad minimum thickness 3.0 mm (0.118 inch)
Brake pad maximum thickness variation (pad-to-pad) 2.0 mm (0.079 inch)
Brake pad maximum taper wear (in any direction) 3.0 mm (0.118 inch)
Brake Rotor/Disc
Front brake disc minimum thickness 24.75 mm (0.9744 in.)
Minimum thickness to machine front brake disc 25.35 mm (0.99 in.)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.