Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMERCURY2004SABLE V6-3.0L DOHC VIN SREPAIR AND DIAGNOSISSPECIFICATIONSELECTRICAL SPECIFICATIONSSTARTER MOTOR
2004 Mercury Sable V6-3.0L DOHC VIN S
Starter Motor
2004 Mercury Sable V6-3.0L DOHC VIN SSECTION Starter Motor
Item Specification
Normal engine cranking speed 140-220 rpm
Starter motor no-load current draw 60-80 amps
Starter motor normal load current draw 130 amps
Starter motor maximum load current draw 800 amps
Starter motor minimum stall torque (at 5 volts) 14.7 Nm (10.8 lb-ft)
Starting circuit maximum voltage drop (Engine at normal operating temperature) 0.5 volts
Normal engine cranking speed 140-220 rpm
Starter motor no-load current draw 60-80 amps
Starter motor normal load current draw 130 amps
Starter motor maximum load current draw 800 amps
Starter motor minimum stall torque (at 5 volts) 14.7 Nm (10.8 lb-ft)
Starting circuit maximum voltage drop (Engine at normal operating temperature) 0.5 volts
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.