Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMERCURY1998TRACER L4-122 2.0L SOHCREPAIR AND DIAGNOSISTECHNICAL SERVICE BULLETINSALL TECHNICAL SERVICE BULLETINSKEYLESS ENTRY SYSTEM - SERVICE TIPSSERVICE TIPSKEYLESS ENTRY SYSTEM (WIRED OR WIRELESS)
1998 Mercury Tracer L4-122 2.0L SOHC
Keyless Entry System (Wired or Wireless)
1998 Mercury Tracer L4-122 2.0L SOHCSECTION Keyless Entry System (Wired or Wireless)
1. If issues are experienced with Keyless Entry keypad operation (located on driver door):
a. Look for any signs of water intrusion.
b. Look for proper wiring connections/connector seating.
c. Check for proper keypad backlighting by pressing a button to verify the light turns on.
d. Most vehicles equipped with a keypad incorporate a security feature called Anti-scan mode. Inform customer they have 7 attempts at inputting a valid keycode before the keypad will be locked out for one minute. (Only the lock function operates while in this mode). This one minute anti-scan mode is indicated by the keypad light flashing rapidly.
2. On 2004 Heavy Duty F-Series repairs, note that the vehicle is released with a new wireless keypad (RF). If the wireless keypad or any remote transmitter requires programming, ALL devices must be present and programmed during the same programming procedure. Wireless keypad repairs must not be binned to the remote transmitter part number (15K601).
3. If the RF device (transmitter or wireless keypad) requires a battery replacement, there is NO need to reprogram the device back to vehicle.
a. Look for any signs of water intrusion.
b. Look for proper wiring connections/connector seating.
c. Check for proper keypad backlighting by pressing a button to verify the light turns on.
d. Most vehicles equipped with a keypad incorporate a security feature called Anti-scan mode. Inform customer they have 7 attempts at inputting a valid keycode before the keypad will be locked out for one minute. (Only the lock function operates while in this mode). This one minute anti-scan mode is indicated by the keypad light flashing rapidly.
2. On 2004 Heavy Duty F-Series repairs, note that the vehicle is released with a new wireless keypad (RF). If the wireless keypad or any remote transmitter requires programming, ALL devices must be present and programmed during the same programming procedure. Wireless keypad repairs must not be binned to the remote transmitter part number (15K601).
3. If the RF device (transmitter or wireless keypad) requires a battery replacement, there is NO need to reprogram the device back to vehicle.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.