Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMERCURY1998SABLE V6-3.0L DOHC VIN SREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSSEATSSYSTEM SPECIFICATIONS
1998 Mercury Sable V6-3.0L DOHC VIN S
System Specifications
1998 Mercury Sable V6-3.0L DOHC VIN SSECTION System Specifications
Rear Outboard Nuts 19-26 N.m (14-19 Lb-Ft)
Rear Inboard Nut 68-92 N.m (51-67 Lb-Ft)
Strap and Buckle Assy Nut 30-40 N.m (23-29 Lb-Ft)
Rear Seat Pivot Frame Nuts 23-32 N.m (17-23 Lb-Ft)
Seat Back Bolts 29-39 N.m (22-28 Lb-Ft)
Rear Seat Back-to-Floorpan Bolts 39-51 N.m (29-37 Lb-Ft)
Auxiliary Seat-to-Floorpan Screws 17-22 N.m (13-16 Lb-Ft)
Auxiliary Seat-to-Floor Pan Nuts 68-92 N.m (51-67 Lb-Ft)
Rear Seat Back Center Armrest Link and Vertical Strainer to Rear Seat Back Pad and Frame Nuts 4-6 N.m (36-53 Lb-In)
Front Seat Center Armrest/Console Mounting Bolts 19-26 N.m (14-19 Lb-Ft)
Center Seat Safety Belt Mounting Nuts 78-92 N.m (58-67 Lb-Ft)
Outboard Retaining Screws 30-43 N.m (23-31 Lb-Ft)
Child Seat Pivot Pin 9-15 N.m (7-11 Lb-Ft)
Rear Inboard Nut 68-92 N.m (51-67 Lb-Ft)
Strap and Buckle Assy Nut 30-40 N.m (23-29 Lb-Ft)
Rear Seat Pivot Frame Nuts 23-32 N.m (17-23 Lb-Ft)
Seat Back Bolts 29-39 N.m (22-28 Lb-Ft)
Rear Seat Back-to-Floorpan Bolts 39-51 N.m (29-37 Lb-Ft)
Auxiliary Seat-to-Floorpan Screws 17-22 N.m (13-16 Lb-Ft)
Auxiliary Seat-to-Floor Pan Nuts 68-92 N.m (51-67 Lb-Ft)
Rear Seat Back Center Armrest Link and Vertical Strainer to Rear Seat Back Pad and Frame Nuts 4-6 N.m (36-53 Lb-In)
Front Seat Center Armrest/Console Mounting Bolts 19-26 N.m (14-19 Lb-Ft)
Center Seat Safety Belt Mounting Nuts 78-92 N.m (58-67 Lb-Ft)
Outboard Retaining Screws 30-43 N.m (23-31 Lb-Ft)
Child Seat Pivot Pin 9-15 N.m (7-11 Lb-Ft)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.