Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMERCURY1998SABLE V6-3.0L DOHC VIN SREPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTTRANSMISSION CONTROL SYSTEMSTESTING AND INSPECTIONDIAGNOSTIC TROUBLE CODE DESCRIPTIONSTRANSMISSION FLUID TEMPERATURE (TFT) SENSOR
1998 Mercury Sable V6-3.0L DOHC VIN S
Transmission Fluid Temperature (TFT) Sensor
1998 Mercury Sable V6-3.0L DOHC VIN SSECTION Transmission Fluid Temperature (TFT) Sensor
DESCRIPTION
is located on the transmission main control body. It is a temperature-sensitive device called a thermistor. The resistance value of the TFT will vary with temperature change. The powertrain control module monitors the voltage across the TFT to determine the temperature of the transmission fluid.
The PCM uses this initial signal to determine whether a cold start shift schedule is necessary. The cold start shift schedule allows quicker shifts when the transmission fluid temperature is cold. The PCM also inhibits torque converter clutch operation at low transmission fluid temperatures. Corrects EPC pressures for temperature.
SYMPTOMS
Torque converter clutch engagement and stabilized shift schedules happen too soon after a cold start. Harsh or soft shifts.
DTCs
P0712, P0713, P1711, P1783
is located on the transmission main control body. It is a temperature-sensitive device called a thermistor. The resistance value of the TFT will vary with temperature change. The powertrain control module monitors the voltage across the TFT to determine the temperature of the transmission fluid.
The PCM uses this initial signal to determine whether a cold start shift schedule is necessary. The cold start shift schedule allows quicker shifts when the transmission fluid temperature is cold. The PCM also inhibits torque converter clutch operation at low transmission fluid temperatures. Corrects EPC pressures for temperature.
SYMPTOMS
Torque converter clutch engagement and stabilized shift schedules happen too soon after a cold start. Harsh or soft shifts.
DTCs
P0712, P0713, P1711, P1783
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.