Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMAZDA2001626 ES V6-2.5L DOHCREPAIR AND DIAGNOSISSTARTING AND CHARGINGSTARTING SYSTEMIGNITION SWITCHIGNITION SWITCH LOCK CYLINDERSERVICE AND REPAIR
2001 Mazda 626 ES V6-2.5L DOHC
Ignition Switch Lock Cylinder: Service and Repair
2001 Mazda 626 ES V6-2.5L DOHCSECTION Service and Repair
STEERING LOCK (ATX MODEL) INSPECTION
1. Verify that the cable connector does not move when the key is in the LOCK position and that it moves freely with the key in other positions.
- If not as described, replace the steering lock component.
1. Verify that the cable connector does not move when the key is in the LOCK position and that it moves freely with the key in other positions.
- If not as described, replace the steering lock component.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.