Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMAZDA1999MX-5 MIATA L4-1.8L DOHCREPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTIGNITION SYSTEMSPARK PLUGSERVICE AND REPAIR
1999 Mazda MX-5 Miata L4-1.8L DOHC
Spark Plug: Service and Repair
1999 Mazda MX-5 Miata L4-1.8L DOHCSECTION Service and Repair
CAUTION:
- To avoid breaking the spark plug, be sure to fit the socket squarely over it.
1. Disconnect the high-tension lead.
2. Remove the spark plug.
3. Install in the reverse order of removal.
Tightening torque: 15-22 Nm (1.5-2.3 kg.m, 11-16 ft.lb)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.