Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMAZDA1990626 L4-2184CC 2.2L SOHC F2REPAIR AND DIAGNOSISSTARTING AND CHARGINGCHARGING SYSTEMSPECIFICATIONS
1990 Mazda 626 L4-2184cc 2.2L SOHC F2
Charging System: Specifications
1990 Mazda 626 L4-2184cc 2.2L SOHC F2SECTION Specifications
B2200/B2600 with F2 engine: 55 amps.
B2200/B2600 with G6 engine: 60 amps.
Miata: 60 amps.
MPV: 70 amps.
1990-92 626/MX-6 except turbo with auto. transaxle: 70 amps.
1990-92 626/MX-6 turbo with auto. transaxle: 80 amps.
1993 626/MX-6 w/ FS engine: 80 amps at 2500-3000 rpm.
1993 626/MX-6 w/ KL engine: 90 amps at2500-3000 rpm.
929: 70 amps.
RX-7: 60 amps.
323/Protege: 65 amps.
B2200/B2600 with G6 engine: 60 amps.
Miata: 60 amps.
MPV: 70 amps.
1990-92 626/MX-6 except turbo with auto. transaxle: 70 amps.
1990-92 626/MX-6 turbo with auto. transaxle: 80 amps.
1993 626/MX-6 w/ FS engine: 80 amps at 2500-3000 rpm.
1993 626/MX-6 w/ KL engine: 90 amps at2500-3000 rpm.
929: 70 amps.
RX-7: 60 amps.
323/Protege: 65 amps.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.